Foundry crane

The capacity:

5-320ton

Span length:

10.5-31.5m

Working grade :

The foundry crane is designed to be operated efficiently, uninterruptedly and safely in continuous use.The design conforms to the requirements of international standards.

Send email Chat now

Product description

Technical Parameters

Certifications

Product description

The foundry crane is designed to be operated efficiently, uninterruptedly and safely in continuous use.The design conforms to the requirements of international standards.
Because of a higher risk level, special safety features are designed for the foundry crane that transport molten metal. The main hoist mechanism includes four independent rope reevings, double service brakes on primary shafts, and backup brake acting on the rope drum. Rope equalizer beams are provided with a dampening unit to slow down equalizer beam tilting in case of wire rope failure. An upper emergency stop limit switch is also used in the main hoist. In addition to this overload protection, the ‘emergency stop’ system bypassed from PLC, derailment supports, main hoist over speed supervision, and end limit switches are automatically standard features of the equipment.

The foundry crane utilized for medium to heavy fabrication. These overhead cranes are ideally suited to casting factory.The Foundry crane is the main equipment for steel smelting production.
It is used to move steel or iron ladles in steel smelting workshop with high temperature and a lot of dust. Conventional scheme:using the closed cab.

Each organ is H class. And the insulating YZR type motor. working in the highest ambient temperature is 60°C,collocate with the advanced electric the winch is made with the welding's steel board ,the gear box with the detent and the ratchet wheel.
Power: AC 3Ph 380V 50Hz or according to client's requirement.
Control mode: Cabin control/remote control/control panel with pendant line

The capacity:5-320ton
The span : 10.5-31.5m
The working grade : A7
The working temperature:-25℃ to 40℃

	crane cabin 1.close and open type 2.air-conditioning provided 3.interlocked circuit breaker provided
crane trolley 1.high working duty hoist mechanism 2.working duty:A3-A8 3.capacity:5-320t
	crane hook 1.material:DG20,16Mn,20MnSi,30MnSi 2.grade:m,p,t 3.capacity:5-320t
remote controller 1.apollo,HBC,WICONTEK,telecrane 2.2/4/6/8/10/12keys for choosing 3.voltage:as required
	crane motor 1.YZR,YZP are all provided 2.power:1.8-280Kw 3.number of pole-pairs:4,6,8,10
reducer 1.type:250,350,400,500,650,750,850,1000 2.ratio:8.23-317.28

Technical Parameters

Item	Unit	Result
Lifting capacity	ton	5-320
Lifting height(main/aux)	m	18-24/20-26
Span	m	10.5-31.5
Working environment temperature	°C	-25~40
Hook Speed(main)	m/min	6.8-10.5
Trolley Speed	m/min	67-101.8
Working system		A7
Power source		three-Phase A C 50HZ 380V

Certifications

JDB电子游戏-JDB电子官方网站

Foundry crane

crane cabin

crane trolley

crane hook

remote controller

crane motor

reducer